Products

Sewer Shield® 100 Novolac:
Sewer Shield® 100 is a 100% solids, toweled on, solvent free, low odor epoxy liner system, impervious to a variety of chemicals including concentrations of and up to 98% Sulfuric Acid. Typically supplied in a pre-measured 3 gallon standard pack.
Average sq. ft. rate per gallon at 1/8" thickness is 12.8 sq. ft.
More Info

Sewer Shield® 150 Trowelable:
Sewer Shield® 150 is a 100% solids, solvent free, low odor epoxy liner system designed to withstand acids, grease and many other chemicals particularly sulfuric acid up to concentration of %50.
Typically supplied in 3 gallon pre-measured packs.
Average sq. ft. rate per gallon at 1/8" thickness is 12.8 sq. ft. (dependent on texture of substrate)
More Info

C-120 Cement Underlayment:
C-120 Cement is a fast setting cement based concrete and masonry patching material used on interior or exterior, above and below grade, on vertical, horizontal and overhead surfaces without the use of forms.
Typically supplied 50 lb. green bags, mixes with potable water.
.44 cubic feet per 50 lb. Bag. (sq. ft. dependent on texture of substrate)
More Info

Sewer Shield® Cote 120 Novolac:
Sewer Shield® Cote is a 100% solids, USDA approved, solvent free, low odor, epoxy coating system, impervious to a wide variety of acids, solvents, caustic solutions, oils, grease and many other chemicals.
Typically supplied in either pre-measured packs or as a standard pack (4 gallons).
Average rate per gallon is 160 sq. ft., which produces an approximate thickness of 10 mils.
More Info

Sewer Shield® Caulk 101 Novolac:
Sewer Shield® Caulk 101 is a blend of epoxy resins producing a solvent-free, low odor, resilient caulk, impervious to a variety of chemicals and designed for bridging joints and for filling cracks.
Typically supplied in ½ gallon or 1 gallon pre-measured packs.
Average spread rate per gallon, 50 lin ft. by ½" wide and ½" deep.
More Info

Flex-Guard 250 System Novolac:
Flex-Guard 250 System is a 100% solids, monolithic, solvent free, polyester fabric permeated epoxy system. When applied to walls and/or floors Flex-Guard 250 provides thermal shock resistances, chemical resistances, meets USDA requirements.
Typically supplied in a pre-measured 3 gallon standard pack.
Average sq. ft. rate per gallon at 1/8" thickness is 12.8 sq. ft.
More Info

Corro-Cure:
Corro-Cure is a 100% solid, solvent free epoxy, designed to act as a curing compound and/or sealer for green concrete and old concrete. With a slow set time and virtually no odor, Corro-Cure is ideal for concrete floors in food, beverage and pharmaceutical facilities.
Typically supplied in 1 gallon or 4 gallon pre-measured packs; 2:1 mix.
Average sq. ft. rate per gallon for old concrete is 160 sq. ft. and a maximum of 100 sq. ft. per gallon for green concrete.

Flexi-Caulk:
Flexi-Caulk is a 2 part epoxy resin and urethane polymer caulking system with 100% solids, 75% elongation, low odor, solvent free, V.O.C. compliant material used to fill expansion joints and sever cracks.
Typically supplied in quart, ½ gallon or 1 gallon pre-measured packs.
Average spread rate per gallon, 50 lin ft. by ½" wide and ½" deep.

Corro Aqua-Seal:
Corro Aqua-Seal is a 2 part water-based, low odor, solvent free sealer/primer for smooth or eroded concrete. Aqua-Prime is V.O.C. compliant and formulated with 100% Epoxy Resins. It is used to prime "green," new or old concrete to reduce out gassing of the top coat material.
Typically supplied in 1 gallon or 3 gallon pre-measured 2 part kits.
Average spread rate per gallon, 300 SF per gallon.

Hydrophobic Grout:
Hydrophobic Grout is a hydrophobic polyurethane liquid which, when mixed with catalyst, expands when it meets water or moisture. Mountain Grout adheres tenaciously to practically any substrate, wet or dry.
Typically supplied in 5 gallon kit or 55 gallon drum plus 11 pints catalyst.
Spread rate dependent on moisture content of injection site.